1The 2,080-hour year: where the magic number comes from

Every salary-to-hourly conversion on the internet rests on one number: 2,080. It’s the full-time American working year — 40 hours a week times 52 weeks — and it turned “$50,000 a year” into “$24.04 an hour” with a single division. The number is a convention, not a law of nature: it assumes no unpaid time off, a standard 40-hour week, and every week of the year worked or paid.

The convention’s age shows. It comes from the industrial-era standard workweek, codified for US federal pay calculations generations ago, and it quietly persists even as real schedules drift — four-day weeks, 37.5-hour contracts (1,950 hours a year), term-time work, academia’s nine-month appointments. Whenever a salary conversion feels “off”, the hours assumption is the first suspect. A $60,000 salary is $28.85 an hour at 40 hours a week, but $30.77 on a 37.5-hour contract and only $26.67 if the job really runs 45 hours — same salary, three hourly lives.

Our converter therefore treats hours-per-week and weeks-per-year as first-class inputs rather than fine print. The defaults (40 and 52) match the standard convention, but the honest answer for your job comes from your schedule. Knowing which assumption is baked into any number someone quotes you — a recruiter, a headline, a comparison site — is most of financial literacy in this one corner of life.

2Converting both ways (and the × 2 shortcut)

The conversions are simple multiplications once the hours are set. Salary → hourly: divide by hours per year. Hourly → salary: multiply. Monthly pay is annual ÷ 12; a bi-weekly paycheck is annual ÷ 26 (not 24 — there are 26 two-week periods in a year, which is why two months a year deliver three paychecks, the budgeter’s favourite surprise). Weekly is annual ÷ 52.

For mental maths there’s a beloved shortcut: to estimate a salary from an hourly rate, double it and add three zeros — $25/hour ≈ $50,000. The exact figure is $52,000 (25 × 2,080), so the shortcut underestimates by about 4% — safely conservative for quick comparisons, wrong enough to matter in a negotiation. The reverse shortcut (salary ÷ 2, drop the zeros) turns $80,000 into “about $40 an hour” against the true $38.46.

Use the shortcuts across a café table; use the converter across a negotiating table. The gap between them at $25/hour is $2,000 a year — roughly a month’s rent, decided by whether someone bothered to multiply properly.

3PTO changes everything: paid hours vs worked hours

Here is the subtlest idea in this guide: a salaried employee is paid for 2,080 hours but doesn’t work all of them. Three weeks of vacation plus ten public holidays remove 200 hours; the work actually happens in 1,880 hours. Divide $60,000 by worked hours and the effective rate is $31.91 an hour, not $28.85. Both numbers are “true” — they answer different questions. The paid-hours rate compares salaries; the worked-hours rate compares your actual time.

Hourly and contract workers live the mirror image: their rate applies only to hours worked, and unpaid weeks come straight off the annual total. A contractor at $35/hour with four unpaid weeks earns 35 × 40 × 48 = $67,200 — less than the $72,800 the naive 52-week maths promised. This is exactly why the converter asks for weeks per year: set it to 48 or 49 and the freelance comparison gets honest fast.

When an employer converts your salary into an “equivalent hourly rate” during negotiations, watch which denominator they reach for. Paid-hours maths makes their number look smaller and yours bigger; worked-hours maths does the opposite. Neither is cheating — but knowing both exist is the difference between discussing a number and being handed one.

4Gross vs net: why this converter stops at gross

Everything in this converter is gross — before income tax, social contributions, retirement deductions and health premiums. That’s deliberate. Gross is the only universal number: two people on identical salaries in different states, countries, filing situations and benefit elections take home different nets, and any converter claiming your take-home from a salary alone is guessing at your life.

What gross conversion is genuinely for: comparing offers on equal footing, pricing freelance work against employment, checking an employer’s maths, and understanding headlines (“the job pays $30 an hour” vs “the job pays $62k”). When the take-home number is what you need — actual paycheck maths with tax brackets, FICA, state tax and deductions — that’s a different tool’s job, and we built it: the Paycheck Calculator handles US take-home pay properly.

A rough orientation, flagged as rough: US workers at middle incomes often see 70–80% of gross reach the bank after all payroll deductions, with wide variance either way. Freelancers should assume less — self-employment tax alone takes a visible bite, and Section 5 prices that in.

5Going freelance: why your rate must jump 30–50%

The classic beginner freelancer error: take your salary, divide by 2,080, and charge that hourly rate. You have just taken a large pay cut while feeling like you matched your old job. The salary was never just the salary — it rode on employer-paid payroll taxes, health insurance, retirement contributions, paid vacation, sick days, equipment, and the small matter of someone else finding the work. As a US freelancer you now buy all of that yourself, plus self-employment tax (15.3% on most earnings), plus unpaid admin and business-development hours.

The standard correction: multiply the employee-equivalent hourly rate by 1.3 to 1.5 before quoting. Our $24.04/hour employee becomes a $31–36/hour freelancer just to stand still financially. Then add the utilisation reality from Section 3 — if only 30 of your 40 weekly hours are billable, the rate climbs again: target income ÷ billable hours, not ÷ all hours. The converter’s adjustable weeks exist precisely for this test — set weeks to your realistically billable year and watch the honest rate appear.

None of this means freelancing pays worse; top-of-market freelancers far out-earn salaries. It means the comparison must be done properly or not at all — and “properly” starts with refusing to compare a bare hourly rate to a loaded salary.

6Comparing two offers like an adult

Two offers land: $58,000 salaried with four weeks’ PTO and a 4% retirement match, versus $31/hour contract, no benefits, 48 paid weeks. Convert both to the same units before feeling anything. The contract pays 31 × 40 × 48 = $59,520 gross — superficially ahead. But the salary carries extras: the match alone is $2,320/year, and the employer’s share of payroll taxes and insurance is real money the contractor must replace. On total-compensation terms the salary is likely ahead by several thousand — and the contract’s risk (no work, no pay) isn’t priced in at all yet.

The disciplined routine: (1) convert both to gross annual on realistic hours and weeks; (2) add employer extras to the salary side (match, insurance value, bonuses at their honest expected value, not their press release value); (3) subtract the freelancer’s replacement costs from the contract side; (4) only then weigh the non-money terms — security, flexibility, growth — with actual numbers on the table. The calculator handles step 1 in seconds; steps 2–4 are judgement, but judgement with numbers beats vibes with numbers.

Negotiation translation: “Your offer equals $27.88 an hour; the competing offer equals $31 an hour for fewer weeks. Meet $62,000 and we’re even.” — hourly maths is how salary conversations get concrete.

7Worked examples at real salary levels

$40,000 a year: ÷ 2,080 = $19.23/hour, $769.23 a week, $3,333 a month. This is the conversion behind a thousand “but that’s barely above minimum wage in my state” realisations — which is the point of doing it.

$75,000 a year: $36.06/hour. On a 37.5-hour contract week (1,950 hours) it’s $38.46 — the same salary, worth $2.40/hour more of your life back.

$30 an hour: × 2,080 = $62,400 a year; with four unpaid weeks, $57,600 — the $4,800 cost of a month off, priced exactly.

The two-offer duel: $85,000 salary vs $45/hour contract at 50 weeks: contract gross is $90,000. Add a typical benefits load (~20–30%) to the salary and its total comp is $102,000+ — salary wins on money; the contract wins only if flexibility is worth five figures to you. It might be! But now it’s a choice, not an accident.

The raise in hourly clothes: a $3,000 raise on $60,000 is $1.44/hour — 5%. Quoting raises in hourly terms makes small percentages tangible in both directions: employers use it to shrink raises; employees can use it to shrink signing-bonus theatre back into proportion too.

8Frequently asked questions

Why are there 26 bi-weekly paychecks but 24 semi-monthly ones?

Bi-weekly pay runs every two weeks: 52 weeks ÷ 2 = 26 paychecks a year. Semi-monthly pay runs twice a month: 12 × 2 = 24. The two 'extra' bi-weekly checks create two three-paycheck months a year — a beloved budgeting bonus, but it also means each bi-weekly check is slightly smaller than a semi-monthly one at the same salary.

What is $100,000 a year hourly?

100,000 ÷ 2,080 = $48.08 an hour at 40 hours a week for 52 weeks. On 45-hour weeks it's $42.74; on a 37.5-hour contract it's $51.28. Six figures sounds like one number and converts to a range — always ask which schedule the conversion assumes.

How much is $20 an hour annually?

20 × 40 × 52 = $41,600 gross. With two unpaid weeks it's $40,000; with four, $38,400. The converter's weeks-per-year field exists for exactly this — hourly workers with unpaid time off should never use the 52-week figure for planning.

Should freelancers charge exactly their old hourly equivalent?

Almost never. Employee pay carries employer taxes, insurance, retirement contributions and paid leave that a freelancer must self-fund, plus unpaid admin hours. The standard correction is 1.3–1.5× the employee-equivalent rate; pricing below that usually means accepting a quiet pay cut.

Does this converter account for taxes?

No — it converts gross pay, the only figure that's comparable across people and places. Net pay depends on your country, state, filing status and deductions. For US take-home pay with real tax maths, use our Paycheck Calculator instead.

What hourly rate equals the US federal minimum wage salary?

$7.25/hour × 2,080 = $15,080 a year. Many states and cities set higher minimums — at $16/hour the equivalent salary is $33,280. The comparison cuts both ways: a $32,000 salaried offer in a $16-minimum city is effectively below minimum wage per hour if the hours are truly 40 a week.

Keep exploring

Pay is a system, not a number. These tools cover its other corners:

Convert your pay in seconds

Salary to hourly and back, with your real hours and weeks — plus every pay period from hourly to annual on one screen. Free, private, no signup.

💵 Open the Salary Converter

100% free · No account · Private by design

Related guides

More step-by-step guides on this topic: