Bijli Bill Calculator

Estimate your electricity bill before it arrives — type your units, pick your consumer type, and see the energy charges, fixed charges and taxes, line by line.

Flat vector illustration of a house with an electricity meter and a glowing light bulb

Slab rates (Rs per unit) — edit any rate to match your bill exactly

Defaults are the NEPRA residential tariff, FY 2025-26, notified under S.R.O. 279(I)/2026 and effective from 1 July 2025.

Unprotected — one rate applies to ALL units (the highest slab you reach)

Protected — charged slab by slab

Lifeline — one rate for the whole month

Fixed charges and taxes (estimates — edit to match your bill)

This is an estimate. Your real bill also has FPA (fuel price adjustment, which changes every month), surcharges, arrears and meter rent — none of those are in this total. K-Electric (Karachi) bills on its own separate schedule, so these rates do not apply to a K-Electric bill.

Estimated total bill
—

The quick answer

300 units as an unprotected consumer comes to about Rs 12,373. The energy charge is 300 × Rs 33.10 = Rs 9,930, then fixed charge Rs 400, electricity duty Rs 149, GST Rs 1,859 and TV fee Rs 35 on top. The per-unit rate is only the starting point — taxes and fixed charges add roughly a quarter on top of it.

The single biggest thing to know: unprotected billing is not slab by slab. Once you cross into a higher slab, the higher rate applies to every unit, not just the extra ones. That is why going from 200 to 201 units can nearly double the energy charge.

The formula, and two worked examples

Unprotected: every unit is charged at the rate of the highest slab reached. Protected: the first 100 units at Rs 10.54, the next 100 at Rs 13.01. Lifeline: one rate for the whole month. Then add the fixed charge, 1.5% electricity duty on the energy charges, 18% GST on energy + fixed charges (unprotected only), and the Rs 35 TV fee.

Total = Energy charges + Fixed charge + Duty (1.5%) + GST (18%) + TV fee (Rs 35)
Example 1 — 300 units, unprotected: Highest slab is 201–300, so all 300 units at Rs 33.10 = Rs 9,930. Fixed charge Rs 400, duty 1.5% of 9,930 = Rs 148.95, GST 18% of (9,930 + 400) = Rs 1,859.40, TV fee Rs 35. Total = Rs 12,373.35.
Example 2 — 150 units, protected: Slab by slab: 100 × Rs 10.54 = Rs 1,054, plus 50 × Rs 13.01 = Rs 650.50, so energy = Rs 1,704.50. Fixed charge Rs 300, duty 1.5% = Rs 25.57, no GST (protected consumers are exempt), TV fee Rs 35. Total = Rs 2,065.07. Same 150 units would cost about Rs 5,600 as an unprotected consumer — protection is worth a lot.

NEPRA residential tariff, FY 2025-26 (Rs per unit)

Base energy rates notified under S.R.O. 279(I)/2026, effective 1 July 2025. These apply to all WAPDA DISCOs (LESCO, IESCO, MEPCO, FESCO, GEPCO, PESCO, HESCO, SEPCO, QESCO). K-Electric has its own separate schedule.

Slab (units/month)UnprotectedProtectedLifeline
1 – 5022.4410.543.95
51 – 10022.4410.547.74
101 – 20028.9113.01—
201 – 30033.10——
301 – 40037.99——
401 – 50040.22——
501 – 60041.62——
601 – 70042.76——
Above 70047.69——

Protected vs unprotected vs lifeline

Lifelineup to 100 units

Rs 3.95/unit up to 50 units, Rs 7.74 for 51–100. No fixed charge, no GST. Single-phase, sanctioned load up to 1 kW.

Protectedup to 200 units

Rs 10.54 for the first 100 units, Rs 13.01 for 101–200, charged slab by slab. No GST. Needs a 6-month average of 200 or fewer units.

Unprotectedabove 200 units

One rate on every unit — the rate of the highest slab reached. 18% GST applies. Fixed charge Rs 400 a month.

The cliff200 → 201 units

200 units protected costs about Rs 2,355 in energy charges. 201 units unprotected costs 201 × Rs 33.10 = Rs 6,653. One extra unit can add thousands.

Easy mistakes to avoid

  • Thinking the slabs work like tax slabs. For unprotected consumers the highest slab rate applies to all units, not just the extra ones. 300 units is 300 × Rs 33.10, not 100 × 22.44 + 100 × 28.91 + 100 × 33.10.
  • Assuming you are protected because this month was under 200. Protection is a 6-month average test. One month above 200 units can cost you protected status for the next six months.
  • Forgetting FPA. The fuel price adjustment changes every month and is not in this estimate. It is often the reason a bill is higher than the slab maths suggests — check the FPA line on your bill.

Tips to bring the bill down

  • Stay under 200 units to keep protection. It is the single biggest saving on a Pakistani bill — protected rates are less than half the unprotected ones on the first 100 units.
  • Set the AC to 26°C. Each degree below 26 adds roughly 6% to the AC's power use. A ceiling fan with the AC at 26 feels almost the same and uses far less.
  • Swap bulbs for LEDs. One 60W bulb replaced with an 8W LED saves 52 watts an hour. Across a house, that is tens of units a month.

The complete guide

Every month the bijli bill lands, and every month someone in the house asks the same question: why is it this high?

Read: Bijli Bill Calculator — the Complete Guide →

Frequently asked questions

How is a bijli bill calculated in Pakistan?

First the energy charge: your units times the NEPRA slab rate for your consumer type. Then the fixed monthly charge, 1.5% electricity duty, 18% GST (unprotected consumers only) and the Rs 35 TV fee. FPA and surcharges, which change monthly, come on top — this calculator leaves them out and says so.

What is the per-unit rate for 300 units?

For an unprotected consumer, 300 units are all charged at Rs 33.10 (the 201–300 slab), so the energy charge is Rs 9,930. A protected consumer cannot use 300 units at protected rates — protection ends at 200 units.

What is a protected consumer?

A household whose monthly consumption averaged 200 units or fewer over the past 6 months. Protected consumers pay Rs 10.54/unit for the first 100 units and Rs 13.01 for 101–200, slab by slab, and pay no GST.

Why did my bill jump so much when I crossed 200 units?

Because unprotected billing is not slab by slab: the rate of the highest slab you reach applies to every unit. 200 protected units cost about Rs 2,355 in energy charges; 201 unprotected units cost 201 × Rs 33.10 = Rs 6,653.

Are these rates the same for LESCO, MEPCO and other DISCOs?

Yes. NEPRA notifies one uniform domestic tariff for all WAPDA DISCOs — LESCO, IESCO, MEPCO, FESCO, GEPCO, PESCO, HESCO, SEPCO and QESCO all charge the same base slab rates. K-Electric (Karachi) is the exception, with its own separately determined schedule.

What is FPA on my electricity bill?

FPA is the fuel price adjustment — a monthly charge that corrects for the difference between the fuel cost assumed in the tariff and what power plants actually paid. It changes every month, so this calculator does not include it. Check the FPA line on your bill for the current figure.