1What is a bijli bill?
A bijli bill is the monthly electricity bill from your distribution company — LESCO in Lahore, IESCO in Islamabad, K-Electric in Karachi, and others across Pakistan. It charges you for the electricity your home used in the billing month, measured in units, where one unit is one kilowatt-hour (kWh): running a 1,000-watt appliance for one hour uses one unit.
The bill is not a single charge. It is a stack: the cost of the units you used, a fixed monthly charge, and then a set of taxes and surcharges added on top. That stack is why a bill can feel much bigger than the units alone suggest — and why two homes using the same units can pay different amounts.
Your meter reader records the reading each month, and the difference from last month's reading is your usage. If the meter cannot be read, the company may send an estimated bill based on past usage, which is later adjusted — one of the most common reasons for a surprise bill.
2How to use the bijli bill calculator
Our calculator estimates your bill before it arrives, so there are no surprises:
- Enter your units used — from your meter, or from last month's bill if you are estimating.
- Pick your consumer type — residential is the usual choice for homes; commercial rates are different.
- See the breakdown — energy charges by slab, fixed charges, and the taxes that get added, so you can see where the money actually goes.
- Try a lower unit number to see what saving 50 units would do to the total. Slab pricing means the savings are often bigger than people expect.
The calculator uses the current tariff structure. Rates are revised by the regulator from time to time, so treat the result as a close estimate and check the printed bill for the final figure.
3How slab rates work
Pakistan's residential tariff is a slab system: the more units you use, the higher the per-unit price. The first units are the cheapest, and each higher slab costs more per unit. That is why a home using 350 units does not just pay a little more than a home using 300 — it pays a higher rate on the extra units too.
There is also a split between protected and non-protected consumers. Households using up to 200 units a month for six months in a row are protected and pay lower rates; once you cross 200 units, you lose protected status and move to the higher non-protected rates. That single crossing is the reason many bills suddenly jump — the higher rate applies to the whole bill, not just the units above 200.
Because rates change with government and regulator decisions, this guide does not print fixed per-unit prices. The calculator on this site uses the current structure — use it for the number, and use this guide to understand the logic.
4The taxes and charges on top
Even if you understand the slabs, the bottom of the bill can still surprise you. These lines appear on most residential bills:
- General Sales Tax (GST) — charged as a percentage of the energy cost, and usually the biggest tax line on the bill.
- Fuel Price Adjustment (FPA) — an adjustment for changes in fuel costs at power plants, which can be positive or negative and varies month to month.
- TV licence fee — a small fixed fee collected through the bill.
- Fixed charges — a monthly amount based on your sanctioned load, charged even if you use very little electricity.
- Further tax / extra tax — additional charges that apply to certain consumers, such as unregistered ones.
- Surcharge and late payment fee — paying after the due date adds a surcharge, usually 10% of the bill, so paying on time is the easiest saving of all.
Reading these lines is worth two minutes a month. If a line jumps suddenly — especially FPA or a tax — you will know exactly where the increase came from instead of guessing.
5Mistakes that make the bill bigger
- Crossing 200 units without noticing. Staying under 200 units keeps protected status and the lower rates. A single heavy month can cost you the status for months.
- Running old appliances. Old fridges, water pumps and air conditioners are the biggest unit-eaters in most homes. A 20-year-old fridge can use twice the electricity of a new inverter one.
- Leaving things on standby. TVs, UPS systems and chargers draw power all day. It is small per device, but across a house it adds up to real units.
- Paying late. The late-payment surcharge is usually 10% — the most avoidable charge on the entire bill.
- Not checking estimated bills. If your bill says "estimated," compare the reading with your meter. Wrong estimates get corrected, but only if you report them.
6How to actually lower your bijli bill
Attack the air conditioner first. In summer, the AC is usually half the bill or more. Setting it to 26°C instead of 22°C, using a fan alongside it, and servicing it before summer can cut its units sharply.
Switch to LED bulbs and inverter appliances. LEDs use a fraction of the power of old bulbs, and inverter fridges and ACs adjust their draw instead of running flat-out. The upfront cost pays for itself in a few months of lower bills.
Use heavy appliances in off-peak hours. If your meter supports time-of-use billing, running the washing machine, iron and water pump outside peak evening hours costs less per unit.
Track units weekly, not monthly. Glance at the meter every Sunday. If you are heading for 200 units by mid-month, you still have time to ease off — after the bill arrives, it is too late.
Consider solar for the long run. A small solar setup will not erase the bill overnight, but for homes with high daytime usage it can cut the monthly total substantially, and net metering lets extra units flow back to the grid.
Estimate your bijli bill — try the free calculator
Enter your units and see the estimated bill with the slab breakdown, fixed charges and taxes — before the real one arrives.
💡 Open the Bijli Bill Calculator100% free · No account · Private by design
7Frequently asked questions
How is the bijli bill calculated in Pakistan?
Your meter reading gives the units used (1 unit = 1 kWh). Units are charged on a slab system — higher usage means a higher per-unit rate — then fixed charges, GST, fuel price adjustment and other taxes are added on top.
What are protected and non-protected consumers?
Households using up to 200 units a month for six months in a row are protected and pay lower rates. Cross 200 units and you become non-protected, paying higher rates on the whole bill.
Why did my bill suddenly increase?
The usual reasons are crossing the 200-unit line and losing protected status, summer AC use, a fuel price adjustment, or an estimated reading. Check the units and the FPA line first.
What is the fuel price adjustment (FPA)?
It is a monthly adjustment for changes in fuel costs at power plants. It can raise or lower your bill and varies month to month — it is printed as its own line on the bill.
How can I reduce my electricity bill?
Keep usage under 200 units to hold protected status, set the AC to 26°C, switch to LED bulbs and inverter appliances, avoid standby power, and always pay before the due date to skip the 10% late surcharge.
What is one unit of electricity?
One unit is one kilowatt-hour (kWh): a 1,000-watt appliance running for one hour uses one unit. A 100-watt bulb needs 10 hours to use one unit.
Keep exploring
Bills are easier to handle with the right tools. These help:
