Square Meters to Square Feet Converter

Convert square meters, square feet, acres, hectares and more instantly — free, no signup, private. Includes exact formulas, a 1–20 m² to ft² table and FAQs.

Flat vector illustration for the Area Converter
Result
1076.391 square feet

All area units at once

Square meters to square feet — the quick answer

To convert square meters to square feet, multiply by 10.7639. That's it: 100 m² × 10.7639 = 1,076.391 ft². The factor comes from squaring the length conversion — 1 foot is 0.3048 m, and 0.3048² = 0.09290304, so 1 m² ÷ 0.09290304 = 10.7639 ft². You'll use this constantly for floor plans, apartment listings and real estate that cross the metric–imperial divide.

The converter above handles the full range: square centimeters and inches for small surfaces, square meters and feet for rooms and homes, square yards for carpets and fabric, and acres, hectares, square kilometers and square miles for land.

A short history of the acre and the hectare

The acre is a fossil of medieval farming: the area a yoke of oxen could plow in one day. It was standardized as a furlong (660 ft) by a chain (66 ft) — 43,560 square feet, or 4,840 square yards. The word itself comes from the Old English æcer, meaning an open field. When the 1959 yard agreement fixed the foot at 0.3048 m, the acre became exactly 4,046.8564224 m².

The hectare arrived with the metric system in 1795: 100 ares, where one are is 100 m² — so a hectare is a clean 10,000 m². It was designed for exactly what the acre does: measuring farmland. Today the two live side by side — hectares dominate European land registries, acres dominate American ones, and 1 hectare = 2.47105 acres.

The square meter needs no history lesson: it's simply the SI derived unit, a square with 1-meter sides. But remember its trap — because area scales with the square of length, a 10% error in a length measurement becomes a 21% error in area.

How it works: the formula

Convert through square meters — and remember the golden rule: square the linear factor. Since 1 ft = 0.3048 m, 1 ft² = 0.3048² = 0.09290304 m²:

m² = value × (unit's square meters per unit)
ft² = m² ÷ 0.09290304
Example 1: Convert 100 m² to square feet.
100 ÷ 0.09290304 = 1,076.391 ft² — a spacious two-bedroom apartment.
Example 2: Convert 1 acre to square meters.
1 × 4046.8564224 = 4,046.8564 m².
Example 3: Convert 1 hectare to acres.
1 × 10000 = 10,000 m², then 10,000 ÷ 4046.8564224 = 2.4711 acres.

Square meters to square feet table (1–20 m²)

A quick-reference table for the most commonly looked-up values, rounded to four decimals (1 m² = 10.7639 ft²):

Square metersSquare feet
1 m²10.7639 ft²
2 m²21.5278 ft²
3 m²32.2917 ft²
4 m²43.0556 ft²
5 m²53.8196 ft²
6 m²64.5835 ft²
7 m²75.3474 ft²
8 m²86.1113 ft²
9 m²96.8752 ft²
10 m²107.6391 ft²
11 m²118.4030 ft²
12 m²129.1669 ft²
13 m²139.9308 ft²
14 m²150.6947 ft²
15 m²161.4587 ft²
16 m²172.2226 ft²
17 m²182.9865 ft²
18 m²193.7504 ft²
19 m²204.5143 ft²
20 m²215.2782 ft²

How big is it really? Everyday comparisons

Familiar areas, in metric and imperial — from a parking space to a country:

12 m²≈ 129 ft²

A standard parking space.

260.87 m²≈ 2,808 ft²

A doubles tennis court.

5,351 m²≈ 1.32 acres

An American football field with end zones.

7,140 m²≈ 1.76 acres

A FIFA football (soccer) pitch.

341 ha≈ 843 acres

Central Park in New York City.

2.02 km²≈ 0.78 mi²

The entire country of Monaco.

Visual guide: 1 m² vs. 1 ft²

The big square is 1 square meter (divided into 100 dm² cells); the small one is 1 square foot, drawn to true scale. Area shrinks fast — the ft² square's sides are 3.28× shorter:

1 square meter vs. 1 square foot1 m² (100 dm² cells)1 ft²Each side of the ft² squareis 3.28× shorter — area scaleswith the square of the length.1 m² = 10.7639 ft²

Figure: one square meter (left, indigo grid) versus one square foot (right, violet) at true relative scale.

Common mistakes to avoid

Small slips cause surprisingly large errors. Watch out for these four:

  • Forgetting to square the linear factor. The #1 area mistake: converting feet to meters with 0.3048 and stopping there. For area you need 0.3048² = 0.09290304 — the unsquared shortcut is off by 3.28×.
  • Mixing up acres and hectares. A hectare (10,000 m²) is 2.47× bigger than an acre (4,046.86 m²). On a land purchase, that confusion costs real money.
  • Reading "sq ft" as a length. "10 sq ft" is an area (e.g. 2 × 5 ft); "10 ft sq." or "10 ft square" means a 10 × 10 ft square = 100 sq ft. The wording matters.
  • Applying length intuition to area prices. Doubling a room's length and width quadruples its area — and roughly quadruples flooring and paint costs. Budget by area, not by length.

Pro tips & mental math

No calculator handy? These tricks get you within a hair of the exact answer:

  • m² → ft²: multiply by 10.76. Or roughly ×11 for a mental estimate. 50 m² ≈ 550 ft² (exact: 538.2).
  • ft² → m²: divide by 10.76. A 1,000 ft² home is about 93 m².
  • An acre is about 0.4 hectares. More precisely 0.404686 ha — "two and a half acres per hectare" is the easy version.
  • A square yard is 9 square feet. Carpets, turf and fabric are often priced per yd² — divide the ft² price by 9 to compare.

Printable cheat sheet

Want the full 1–100 m² table on paper? Print a clean, ink-friendly cheat sheet with one click — the page header, widgets and navigation are automatically hidden in the printout:

Fun facts

  • An acre is 43,560 square feet. That's 4,840 square yards — a furlong (660 ft) times a chain (66 ft), the medieval plowman's day.
  • Vatican City is 0.44 km². The world's smallest country would fit inside New York's Central Park nearly eight times over.
  • "Acre" meant any open field. In Old English, æcer just meant a field — the precise 4,840 yd² definition came centuries later.
  • Russia is 17.1 million km². The largest country covers more than a ninth of Earth's land — about 6.6 million square miles.

The complete guide

What area actually is, why an acre comes from oxen and a hectare from thin air, the square-vs-linear trap that ruins flooring estimates, and exact conversions between m², ft², acres, hectares and more — with real examples from apartments to farmland.

Read: Area Converter — The Complete Guide →

Frequently asked questions

What is the square meters to square feet formula?

Multiply square meters by 10.7639. Example: 100 m² × 10.7639 = 1,076.391 ft². To go back, divide square feet by 10.7639.

How many square feet are in an acre?

Exactly 43,560 square feet (4,840 square yards, or 4,046.8564224 m²).

What is the difference between an acre and a hectare?

A hectare is 10,000 m² and an acre is 4,046.86 m² — so one hectare equals 2.47105 acres. The hectare is about 2.5× bigger.

Why do I have to square the conversion factor for area?

Area is length × length, so the factor applies twice: 1 ft² = 0.3048 m × 0.3048 m = 0.09290304 m². Using 0.3048 unsquared gives a wrong answer.

How big is 100 square meters?

1,076.39 ft² — roughly a large two-bedroom apartment, or about a fifth of a tennis court.

How do I convert square feet back to square meters?

Divide by 10.7639 (or multiply by 0.09290304). Example: 500 ft² ÷ 10.7639 = 46.45 m².