Length Converter

Convert between millimeters, centimeters, meters, kilometers, inches, feet, yards and miles instantly — free, no signup, private. Includes exact formulas, a meters-to-feet table and FAQs.

Flat vector illustration for the Length Converter
Result
39.3701 inches

All length units at once

Length conversion — the quick answer

To convert any length unit to any other, go through meters: multiply by the unit's value in meters, then divide by the target unit's value in meters. The meter is the SI base unit of length, and most imperial units are legally defined in terms of it — 1 inch is exactly 0.0254 m, 1 foot exactly 0.3048 m, 1 yard exactly 0.9144 m and 1 mile exactly 1609.344 m. Because these are definitions rather than measurements, your conversions are exact, not approximate.

Use the converter above for instant answers as you type — millimeters for engineering tolerances, centimeters for clothing and screens, meters and kilometers for distances, and inches, feet, yards and miles for anything measured the American or British way.

A short history of the meter and the mile

The meter was born during the French Revolution. In 1791 the French Academy of Sciences proposed defining it as one ten-millionth of the distance from the equator to the North Pole, and in 1799 a platinum bar — the "mètre des Archives" — became the physical standard. But a metal bar can warp and wear, so in 1983 the meter was redefined as the distance light travels in a vacuum in 1/299,792,458 of a second, tying it to the one constant in the universe that never changes: the speed of light.

Imperial units took a messier road. The mile descends from the Roman mille passus — a thousand paces, roughly 1,480 meters — and was later stretched to 5,280 feet in Elizabethan England so it would divide neatly into furlongs. The yard was once said to be the distance from King Henry I's nose to his outstretched thumb. Order finally arrived with the International Yard and Pound Agreement of 1959, signed by the US, UK, Canada, Australia, New Zealand and South Africa, which fixed the yard at exactly 0.9144 meters — and with it the inch, foot and mile.

That agreement is why this page can promise exact conversions: 1 ft = 0.3048 m is not a measured value that scientists might refine next year. It is a legal definition, frozen in 1959, and it will be 0.3048 m forever.

How it works: the formula

Convert through meters — multiply into meters, then divide out to the target unit:

meters = value × (unit's meters per unit)
result = meters ÷ (target unit's meters per unit)
Example 1: Convert 100 cm to inches.
100 × 0.01 = 1 m, then 1 ÷ 0.0254 = 39.3701 inches.
Example 2: Convert 5 ft to cm.
5 × 0.3048 = 1.524 m, then 1.524 ÷ 0.01 = 152.4 cm.
Example 3: Convert 1 mile to kilometers.
1 × 1609.344 = 1609.344 m, then 1609.344 ÷ 1000 = 1.609344 km.

Meters to feet conversion table (1–20 m)

A quick-reference table for the most commonly looked-up values, rounded to four decimals (1 m = 3.28084 ft):

MetersFeet
1 m3.2808 ft
2 m6.5617 ft
3 m9.8425 ft
4 m13.1234 ft
5 m16.4042 ft
6 m19.6850 ft
7 m22.9659 ft
8 m26.2467 ft
9 m29.5276 ft
10 m32.8084 ft
11 m36.0892 ft
12 m39.3701 ft
13 m42.6509 ft
14 m45.9318 ft
15 m49.2126 ft
16 m52.4934 ft
17 m55.7743 ft
18 m59.0551 ft
19 m62.3360 ft
20 m65.6168 ft

How big is it really? Everyday comparisons

Numbers on a screen are abstract — everyday objects aren't. Here are familiar lengths with their metric and imperial values:

8.56 cm≈ 3.37 in

The exact width of a credit or debit card.

2.03 m≈ 6 ft 8 in

The height of a standard interior door.

3.05 m≈ 10 ft

The height of a basketball hoop rim.

30 m≈ 100 ft

Roughly the length of a blue whale, the largest animal ever.

109.7 m≈ 120 yd

An American football field including both end zones.

330 m≈ 1,083 ft

The height of the Eiffel Tower including antennas.

Visual guide: meters vs. feet

See how the two scales line up. Because the yard is defined as exactly 0.9144 m, five meters ends at precisely 16.4042 feet:

Meters vs. feet — visual rulerMETERS0123450123456789101112131415161 meter = 3.28084 feetFEET

Figure: a meter ruler (top, indigo) aligned with a foot ruler (bottom, violet). Dashed lines connect each whole meter to its exact foot position.

Common mistakes to avoid

Small slips cause surprisingly large errors. Watch out for these four:

  • Forgetting that imperial units are defined in meters. You don't need separate "conversion factors" memorized for every pair — every imperial unit has an exact meter definition. One clean path through meters handles all 8 units on this page.
  • Rounding 3.28084 down to 3.28 for precise work. Fine for a guess, but over a 100 m building site the shortcut is off by more than 8 cm — enough to matter in construction and engineering.
  • Confusing the US survey foot with the international foot. Before 2023, US land surveying used a foot of 0.3048006 m — two parts per million longer. The survey foot was officially retired on December 31, 2022, so 0.3048 m is now the only foot.
  • Converting in the wrong direction. Sanity check: feet and inches are smaller than meters, so the imperial number must always be bigger than the meter number — 1 m is 3.28 ft, not 0.3 ft.

Pro tips & mental math

No calculator handy? These tricks get you within a hair of the exact answer:

  • A meter is about 3 ft 3 in. 3.28084 ft = 3 feet plus 0.28084 × 12 ≈ 3.37 inches. Handy for judging room dimensions and furniture.
  • A kilometer is about 0.62 miles. Or flip it: a mile is about 1.61 km. For road distances, "multiply km by 0.6" gets you within 4%.
  • A yard is about 9% shorter than a meter. 0.9144 m — close enough that in everyday speech they're nearly interchangeable, but not in tailoring.
  • Millimeters for precision, centimeters for life. Engineering drawings use mm (no decimals needed); everyday measurements use cm. Convert between them by shifting the decimal one place.

Printable cheat sheet

Want the full 1–100 m table on paper? Print a clean, ink-friendly cheat sheet with one click — the page header, widgets and navigation are automatically hidden in the printout:

Fun facts

  • The meter is defined by light itself. Since 1983, one meter is the distance light travels in 1/299,792,458 of a second — no metal bar required.
  • The mile was redefined to fit furlongs. Elizabeth I's parliament set the mile at 5,280 feet (8 furlongs) in 1593, replacing the older 5,000-foot Roman-style mile.
  • The US survey foot is extinct. After decades of two competing feet, the slightly longer survey foot (0.3048006 m) was retired at the end of 2022.
  • A light-year is a length, not a time. It's about 9.461 trillion kilometers — the distance light travels in one Julian year.

The complete guide

It explains what length is, where units like the inch, foot, yard, and mile came from, and the exact conversions between them.

Read: Length Converter — The Complete Guide →

Frequently asked questions

How many centimeters are in an inch?

Exactly 2.54 centimeters. The inch has been legally defined as 2.54 cm since the 1959 International Yard and Pound Agreement.

What is the meters to feet formula?

Multiply meters by 3.28084 to get feet. For example, 10 m × 3.28084 = 32.8084 ft. To go back, divide feet by 3.28084.

How many feet are in a mile?

5,280 feet. A mile is defined as exactly 1,609.344 meters, and 1,609.344 ÷ 0.3048 = 5,280 ft.

What is the difference between a yard and a meter?

A yard is exactly 0.9144 meters — about 8.6% shorter than a meter. They are close, but not interchangeable in precise work.

How do I convert kilometers to miles?

Multiply kilometers by 0.621371. For example, 100 km × 0.621371 = 62.1371 miles. For a quick mental estimate, multiply by 0.6.

Is the inch an exact unit?

Yes — since 1959 the inch is defined as exactly 2.54 cm, so inch conversions are exact rather than approximate.