Mbps to MB/s Converter

Convert megabits to megabytes per second instantly — plus Gbps, Kbps, KB/s and GB/s. Free, no signup, private. Includes a download-time estimator, bits-vs-bytes explained, formulas and FAQs.

Flat vector illustration for the Data Transfer Rate Converter
Result
12.5 megabytes per second
8 bits = 1 byte  →  MB/s = Mbps ÷ 8  ·  Mbps = MB/s × 8

All data transfer rate units at once

Download time estimator

How long will that file actually take? Enter the file size and your connection speed — the math assumes you get the full headline speed with no overhead.

Estimated download time
1 min 20 s

Mbps to MB/s — the quick answer

Internet providers sell you megabits per second (Mbps), but your browser shows downloads in megabytes per second (MB/s) — and 8 bits make 1 byte. So just divide by 8: 100 Mbps ÷ 8 = 12.5 MB/s. That one division explains why a "100 meg" plan never downloads at 100 megabytes per second.

The converter above handles both families — bits (bps, Kbps, Mbps, Gbps, the language of ISPs and speed tests) and bytes (B/s, KB/s, MB/s, GB/s, the language of download managers and file sizes). Below it, the download-time estimator answers the follow-up question everyone actually asks: how long will this file take?

A short history of connection speeds

Speeds are measured in bits because networks move binary data one bit at a time — and marketers liked the bigger number. In the 1990s, a 56k dial-up modem squealed its way to 56 kilobits per second (about 7 KB/s), enough for text pages and a lot of patience. The 2000s brought DSL and cable broadband (1–20 Mbps), the 2010s brought fiber pushing hundreds of Mbps, and today gigabit fiber and 5G routinely clear 300 Mbps–1 Gbps.

Through it all, the bit stuck around as the advertised unit while your computer kept counting bytes — which is exactly why this confusion never dies. One more wrinkle: telecom speeds are decimal (1 Mbps = 1,000,000 bits), not binary powers of 1,024, so this converter uses clean powers of ten throughout.

How it works: the formulas

Everything flows through bits per second:

MB/s = Mbps ÷ 8  ·  Mbps = MB/s × 8
download seconds = (file size in bytes × 8) ÷ speed in bits per second
Example 1: Convert 100 Mbps to MB/s.
100 ÷ 8 = 12.5 MB/s — the real-world download speed of a typical cable plan.
Example 2: Convert 1 Gbps to MB/s.
1,000 ÷ 8 = 125 MB/s — gigabit fiber’s headline download rate.
Example 3: How long to download 1 GB at 100 Mbps?
1,000,000,000 × 8 ÷ 100,000,000 = 80 seconds (about 1 min 20 s — real connections add a little overhead).

Common speeds: Mbps → MB/s and 1 GB download time

The speeds you’ll actually meet, with what they mean for a 1 GB file:

Plan speedDownload rateTime for 1 GB
1 Mbps0.125 MB/s2 h 13 min
5 Mbps0.625 MB/s26 min 40 s
10 Mbps1.25 MB/s13 min 20 s
25 Mbps3.125 MB/s5 min 20 s
50 Mbps6.25 MB/s2 min 40 s
75 Mbps9.375 MB/s1 min 47 s
100 Mbps12.5 MB/s1 min 20 s
150 Mbps18.75 MB/s53 s
200 Mbps25 MB/s40 s
300 Mbps37.5 MB/s27 s
500 Mbps62.5 MB/s16 s
1000 Mbps125 MB/s8 s

How big is it really? Everyday comparisons

What these speeds feel like in daily life:

56 Kbpsdial-up

The 90s modem — a single MP3 took about 10 minutes. We’ve come a long way.

5 Mbpsper stream

One HD video call or stream — the bare minimum for modern life.

25 Mbpsper 4K stream

Netflix’s recommended minimum for one 4K stream.

100 Mbps= 12.5 MB/s

A typical cable plan — a 1 GB file lands in about 80 seconds.

300 Mbpsgood 5G

A strong 5G signal — 1 GB in roughly 27 seconds.

1 Gbps= 125 MB/s

Gigabit fiber — a 50 GB game downloads in under 7 minutes.

Visual guide: bits vs. bytes

The whole confusion in one picture — eight bits pack into a single byte:

Bits vs. bytes: the 8-to-1 rule8 bits →bitbitbitbitbitbitbitbit→ 1 byteadvertised100 Mbps — what your ISP sells youyou see12.5 MB/s — what your download shows (÷8)Remember: providers talk bits, devices talk bytes — divide by 8.

Figure: 8 bits make 1 byte, so an advertised 100 Mbps shows up as 12.5 MB/s in your download manager.

Common mistakes to avoid

These trip up almost everyone at first:

  • Reading “100 MB/s” when the plan says “100 Mbps”. That’s an 8× difference — 100 Mbps is 12.5 MB/s, not 100.
  • Assuming Wi-Fi speed equals plan speed. Wi-Fi is almost always slower than a wired connection — walls, distance and interference all take their cut.
  • Forgetting overhead. Real speeds run 5–15% below the headline number thanks to protocol overhead, so that 80-second download is more like 85–90 seconds.
  • Mixing MB with MiB. Some systems use 1024-based mebibytes — if a file looks ~5% bigger than advertised, that’s probably why.

Pro tips

Handy rules of thumb:

  • Divide Mbps by 8 for MB/s; multiply MB/s by 8 for Mbps. One division both ways.
  • Anchor on 10 Mbps ≈ 1.25 MB/s. Scale from there: 50 Mbps ≈ 6 MB/s, 200 ≈ 25 MB/s.
  • Test wired for the true number. Plug in with ethernet before complaining to your ISP.
  • For big downloads, use the estimator above — it beats mental math and sets honest expectations.

Printable cheat sheet

Want the speed table on paper? Print a clean, ink-friendly cheat sheet with one click — the page header, widgets and navigation are automatically hidden in the printout:

Fun facts

  • The first transatlantic cable (1858) managed only a few bits per second — a short message took hours, and the cable died after three weeks.
  • 56k modems never hit 56k. FCC power limits capped real downloads around 53.3 Kbps.
  • Fiber moves data at ~200,000 km/s — about two-thirds the speed of light in a vacuum.
  • A pigeon once beat broadband. In a famous 2009 race in South Africa, a carrier pigeon carrying 4 GB on a memory stick beat the local ADSL line.

The complete guide

Your "100 meg" plan downloads at 12.5 — and that's not a scam, it's arithmetic.

Read: Data Transfer Rate Converter — The Complete Guide →

Frequently asked questions

Why is my download slower than my internet plan?

Your plan is sold in megabits per second (Mbps) but downloads show megabytes per second (MB/s) — and 8 bits make 1 byte. A 100 Mbps plan downloads at 12.5 MB/s at best. Divide the plan speed by 8 to set your expectations.

How many Mbps do I need for 4K streaming?

About 25 Mbps per 4K stream, according to Netflix's own guidance. A household with two 4K streams plus video calls and gaming is comfortable around 100 Mbps.

What is the difference between MBps and Mbps?

Capital B means bytes, lowercase b means bits — and there are 8 bits in a byte. 100 MBps is eight times faster than 100 Mbps. This mix-up is the single most common speed confusion.

Is 100 Mbps fast?

For most homes, yes. It handles several 4K streams, video calls and gaming at once, and downloads a 1 GB file in about 80 seconds. Heavy households with many users may still prefer 300+ Mbps.

Why does my speed test vary through the day?

Network congestion (evenings are busiest), Wi-Fi interference and distance from the router, background downloads, and the test server's own load all move the number. Test wired, close to the router, for the truest reading.

What do Kbps, Mbps and Gbps stand for?

Kilobits, megabits and gigabits per second — 1,000, 1,000,000 and 1,000,000,000 bits each second. Telecom speeds are decimal (powers of 1,000), not binary (powers of 1,024).