Nm to Ft-Lb Converter

Convert newton-meters to foot-pounds, inch-pounds, kgf-m and more instantly — free, no signup, private. Includes exact formulas, a Nm-to-ft-lb table and FAQs.

Flat vector illustration for the Torque Converter
Result
73.7562 foot-pounds

All torque units at once

Nm to ft-lb — the quick answer

To convert newton-meters to foot-pounds, multiply by 0.737562. So 100 Nm × 0.737562 = 73.7562 ft-lb. The anchor value: 1 Nm = 0.737562 ft-lb, or roughly three-quarters. This is the conversion people reach for when reading car service manuals (modern ones quote Nm, US ones quote ft-lb), setting a torque wrench, or comparing engine specs across markets.

The converter above covers the whole torque family — newton-meters (the SI unit), foot-pounds and inch-pounds for US engineering, kilogram-force meters for older metric tools, and ounce-inches for small motors and electronics.

A short history of torque

Torque is the modern name for what Archimedes understood two thousand years ago: leverage. Give him a long enough lever and he would move the world — because force times distance is what twists things loose. Every bolt you've ever tightened was a lesson in torque.

The newton-meter arrived with the metric system: one newton of force (about the weight of an apple) applied at one meter from the pivot. The foot-pound grew from imperial workshop practice — one pound of force at one foot — and still rules American automotive manuals. The kilogram-force meter came from older European engineering that measured force as "the weight of a kilogram", before the newton took over.

Today car makers quote engine torque in Nm (or ft-lb in the US), and it is torque — not horsepower — that you feel pushing you back into your seat when the light turns green.

How it works: the formula

Convert through newton-meters — multiply into Nm, then divide out to the target unit:

Nm = value × (unit's newton-meters per unit)
ft-lb = Nm ÷ 1.35581795
Example 1: Convert 100 Nm to ft-lb.
100 ÷ 1.35581795 = 73.7562 ft-lb — typical wheel lug-nut torque.
Example 2: Convert 50 ft-lb to Nm.
50 × 1.35581795 = 67.7909 Nm.
Example 3: Convert 10 kgf-m to Nm.
10 × 9.80665 = 98.0665 Nm.

Nm to ft-lb conversion table (5–100 Nm)

A quick-reference table for the most commonly looked-up values, rounded to four decimals (1 Nm = 0.73756 ft-lb):

Newton-metersFoot-pounds
5 Nm3.6878 ft-lb
10 Nm7.3756 ft-lb
15 Nm11.0634 ft-lb
20 Nm14.7512 ft-lb
25 Nm18.4390 ft-lb
30 Nm22.1269 ft-lb
35 Nm25.8147 ft-lb
40 Nm29.5025 ft-lb
45 Nm33.1903 ft-lb
50 Nm36.8781 ft-lb
55 Nm40.5659 ft-lb
60 Nm44.2537 ft-lb
65 Nm47.9416 ft-lb
70 Nm51.6293 ft-lb
75 Nm55.3172 ft-lb
80 Nm59.0050 ft-lb
85 Nm62.6928 ft-lb
90 Nm66.3806 ft-lb
95 Nm70.0684 ft-lb
100 Nm73.7562 ft-lb

How big is it really? Everyday comparisons

What do these torque values mean in real life? Familiar reference points, in both units:

2 Nm≈ 1.48 ft-lb

Tightening a small screw — barely more than finger-tight.

10 Nm≈ 7.38 ft-lb

A bicycle seat-post clamp — enough to hold, not crush.

30 Nm≈ 22.1 ft-lb

Typical spark-plug torque — snug with a small wrench.

120 Nm≈ 88.5 ft-lb

Car wheel lug nuts — a firm two-handed pull.

400 Nm≈ 295 ft-lb

A diesel car's engine torque — the push you feel in your back.

1,000 Nm≈ 738 ft-lb

A sports-car engine at full twist — supercar territory.

Visual guide: torque is force × distance

Torque grows with both how hard you push and how far from the pivot you push — 100 N on a 1 m wrench makes exactly 100 Nm:

Torque = force × distancepivot (bolt)100 N push1 m wrenchtorque =100 Nm

Figure: a 100 N push on the end of a 1 m wrench produces 100 Nm of torque at the bolt — longer handle, bigger twist.

Common mistakes to avoid

Small slips cause surprisingly large errors. Watch out for these four:

  • Confusing torque with energy. A newton-meter of torque and a joule share the same dimensions — but torque is a twisting force, not work done. Same math, different physics.
  • Writing ft-lb when you mean in-lb. They differ by 12×. Bolts specced in inch-pounds (small fasteners) snap easily if you apply foot-pounds.
  • Forgetting friction. Published torque specs assume clean, dry (or sometimes lubricated) threads. Rusty threads can eat half your torque before the bolt even stretches.
  • Mixing up kgf-m and Nm. A kilogram-force meter is 9.80665 Nm — nearly 10×. Older manuals and some Asian-market tools still quote kgf-m.

Pro tips & mental math

No calculator handy? These tricks get you within a hair of the exact answer:

  • Multiply Nm by 0.74 for a quick ft-lb. 100 Nm × 0.74 = 74 ft-lb (exact: 73.76). Close enough for a workshop estimate.
  • Divide ft-lb by 1.36 for Nm. 50 ft-lb ÷ 1.36 ≈ 36.8 Nm (exact: 36.88). The reverse trick lands just as close.
  • Longer wrench = more torque. Double the handle length and the same push makes double the torque — the whole point of a breaker bar.
  • Modern cars speak Nm, US manuals speak ft-lb. When cross-referencing service data, convert first — don't guess.

Printable cheat sheet

Want the full 5–500 Nm table on paper? Print a clean, ink-friendly cheat sheet with one click — the page header, widgets and navigation are automatically hidden in the printout:

Fun facts

  • Archimedes got it first. His famous "give me a lever long enough" is literally the torque formula: force × distance, two thousand years before the newton-meter.
  • Diesel engines win on torque. A diesel makes its peak twist at low RPM — which is why trucks and tractors run on diesel, not horsepower.
  • The kilogram-force is officially retired. The newton replaced it in 1960, but kgf-m still lives on in older torque wrenches and manuals.
  • An F1 engine makes ~500 Nm from 1.6 liters. Tiny displacement, enormous twist — plus a hybrid system that adds even more.

The complete guide

The guide explains newton-meters, foot-pounds and the other torque units, torque vs horsepower, and the exact conversion factors.

Read: Torque Converter — The Complete Guide →

Frequently asked questions

What is the Nm to ft-lb formula?

Multiply newton-meters by 0.737562. For example, 100 Nm × 0.737562 = 73.7562 ft-lb. To convert back, divide ft-lb by 0.737562 (or multiply by 1.35581795).

How many ft-lb is 100 Nm?

73.7562 ft-lb. This is a common wheel-lug-nut torque — roughly what you apply with a firm pull on a standard wrench.

Are ft-lb and lb-ft the same thing?

Yes, they are the same unit. Lb-ft is technically the preferred order (force × distance), but ft-lb is the common spoken and written form.

Is torque the same as energy?

No. A newton-meter of torque and a joule of energy share the same dimensions, but torque is a twisting force while energy is work done — different concepts, different units.

What is a kgf-m?

A kilogram-force meter is an older gravity-based unit: the torque from a 1 kg weight at 1 meter. One kgf-m equals 9.80665 Nm. It still appears on older torque wrenches.

How much torque can I apply by hand?

Roughly 50–80 Nm with a firm pull on a standard wrench, depending on the wrench length and your strength. A torque wrench tells you exactly when to stop.