The quick answer
Square footage is length × width, measured in feet. A 12 ft × 10 ft room is 120 sq ft. Real rooms are rarely whole feet, which is why every input here takes feet and inches separately — 12 ft 6 in × 10 ft is exactly 125 sq ft, no decimal-feet gymnastics needed.
15.67 ft × 11.33 ft = 177.6 sq ft. Add 10% waste for flooring and you order for 195 sq ft.
Why the waste percentage matters
Flooring, tile and decking are cut to fit, and cuts waste material. Ordering exactly your square footage guarantees you run short. Standard allowances:
| Project | Suggested waste | Why |
|---|---|---|
| Paint (walls) | 0% — use sq ft ÷ 350 per coat | One gallon covers ≈ 350 sq ft per coat |
| Laminate / vinyl plank | 10% | End cuts and pattern stagger |
| Hardwood | 10–15% | Board grading, defects, cuts |
| Tile (straight lay) | 10% | Cuts and breakage |
| Tile (diagonal / herringbone) | 15–20% | Angled cuts waste far more |
| Sod / turf | 5–10% | Edge trimming |
L-shaped and awkward rooms
Don’t force an L-shaped room into one rectangle. Split it into two rectangles, add both with the “add another area” button, and the calculator totals them. The same trick handles bay windows (add a small rectangle), alcoves, and hallways. For round areas — a circular patio or rug — measure it as its bounding square for a material estimate, or use the Area Calculator’s circle mode for the true area (π × r²).
Common mistakes to avoid
- Writing 12 ft 6 in as 12.6 ft. Six inches is 0.5 ft, not 0.6. That one slip inflates a 125 sq ft room to 138. Separate feet/inches inputs exist precisely to kill this error.
- Measuring wall-to-wall over skirting and cabinets. For flooring, measure the floor area that will actually be covered; built-in cabinets usually aren’t floored underneath.
- Forgetting closets and landings. If the material continues into them, they’re part of the order. Add them as extra areas.
- Skipping the waste allowance to save money. Running one box short mid-job costs more — in delivery fees, delays, and dye-lot mismatches — than the extra box ever would.
Pro tips
- Convert for material sold in other units: divide sq ft by 9 for square yards (carpet), or use the totals above for square metres (most non-US listings).
- Paint shortcut: wall area = perimeter × ceiling height, minus ~20 sq ft per door and ~15 per window. Then divide by 350 for gallons per coat.
- Real estate listings count differently — they often include wall thickness and unheated spaces. Don’t be surprised when a “1,200 sq ft” home measures smaller room by room.
The complete guide
How do flooring pros measure a room in ninety seconds? Where does the waste rule come from, and why do listings disagree with your tape measure? The full guide covers measuring, waste and cost math end to end.
Frequently asked questions
How do I calculate square footage?
Multiply the length by the width, both in feet. A room that is 12 ft long and 10 ft wide is 120 square feet. If your tape gives feet and inches, enter them in the separate boxes above — the calculator converts inches to feet (divide by 12) for you.
How many square feet is a 12×12 room?
144 square feet: 12 × 12 = 144. A 10×12 room is 120 sq ft, a 12×15 is 180 sq ft, and a 20×20 is 400 sq ft. Add 10% waste if you’re ordering flooring or tile.
How do I convert square feet to square metres?
Multiply by 0.092903. So 500 sq ft ≈ 46.45 m² and 1,000 sq ft ≈ 92.9 m². The calculator shows square metres and square yards in its totals automatically.
How much extra flooring should I order for waste?
Order 10% extra for laminate, vinyl and straight-laid tile; 10–15% for hardwood; 15–20% for diagonal or herringbone tile patterns. Set the waste percentage above and the total to order updates instantly.
How do I measure an L-shaped room?
Divide it into two rectangles, measure each one, and add the areas together. Use the “Add another room or area” button — it totals everything, including waste and cost, across all the rectangles.
How many square feet does a gallon of paint cover?
About 350 sq ft per coat on smooth walls (less on rough or unprimed surfaces). A 12×10 room with 8 ft ceilings has about 352 sq ft of wall, so roughly one gallon per coat — two coats means about two gallons.
Related tools
More converters and handy calculators:
