Hours to Minutes Converter

Convert hours to minutes — plus seconds, days, weeks, months and years — instantly. Free, no signup, private. Includes the exact factors, a 1–30 day conversion table, worked examples and FAQs.

Flat vector illustration for the Time Converter
Result
1.5 hours

All time units at once

Hours to minutes — the quick answer

To convert hours to minutes, multiply by 60. So 1.5 hours = 90 minutes, and 90 minutes ÷ 60 = 1.5 hours — one hour and thirty minutes. Time conversions all run through the same chain: 60 seconds in a minute, 60 minutes in an hour, 24 hours in a day, 7 days in a week.

Going bigger? A day holds 86,400 seconds and a week holds 168 hours. The converter above handles milliseconds up to years the instant you type.

A short history: why time is so oddly numbered

Time is the oldest unit system we still use daily — and the strangest. Around 2000 BCE, Babylonian astronomers counted in base 60, and the habit never died: 60 seconds in a minute, 60 minutes in an hour. Sixty was a brilliant choice for a pre-decimal world because it divides evenly by 2, 3, 4, 5, 6, 10, 12, 15, 20 and 30 — fractions were easy.

The 24-hour day comes from ancient Egypt, where astronomers tracked 12 "decans" (star groups) by night and 12 by day. The 7-day week also traces to Babylon, honoring the seven visible "planets." What took millennia was precision: in 1967 the second was redefined by atomic physics — exactly 9,192,631,770 oscillations of a cesium-133 atom — finally giving time an unchanging anchor.

Even today time resists tidiness: months wobble between 28 and 31 days, leap years patch the calendar, and occasional leap seconds are slipped in to keep atomic clocks in step with Earth's slowing spin. This converter uses the tidy averages — 30.436875-day months and 365.25-day years — which are exact enough for every everyday calculation.

How it works: the formula

Convert through seconds: multiply your value by the unit's seconds, then divide by the target unit's seconds:

seconds = value × seconds-per-unit  →  result = seconds ÷ seconds-per-target

Seconds per unit: ms = 0.001, s = 1, min = 60, hr = 3,600, day = 86,400, week = 604,800, month (avg) = 2,629,746, year (avg) = 31,557,600.

Example 1: Convert 90 minutes to hours.
90 × 60 = 5,400 seconds ÷ 3,600 = 1.5 hours (1 hour 30 minutes).
Example 2: Convert 1 day to seconds.
1 × 86,400 = 86,400 seconds — the number behind every "seconds since midnight" timestamp.
Example 3: Convert 1 week to hours.
1 × 604,800 = 604,800 seconds ÷ 3,600 = 168 hours.

Days to hours conversion table (1–30 days)

Quick reference — days × 24:

DaysHoursMinutes
1241,440
2482,880
3724,320
4965,760
51207,200
61448,640
716810,080
819211,520
921612,960
1024014,400
1126415,840
1228817,280
1331218,720
1433620,160
1536021,600
1638423,040
1740824,480
1843225,920
1945627,360
2048028,800
2150430,240
2252831,680
2355233,120
2457634,560
2560036,000
2662437,440
2764838,880
2867240,320
2969641,760
3072043,200

How big is it really? Everyday comparisons

Time spans become intuitive when you anchor them to daily life:

1 seconda heartbeat

Roughly one heartbeat at rest — the base unit everything else stacks on.

90 seconds1.5 minutes

About the time to microwave popcorn — the classic "minute and a half."

90 minutes1.5 hours

One full football (soccer) match — the most famous 90-minute block in sports.

24 hours86,400 seconds

One full day — the heartbeat of every timestamp and deadline.

168 hoursone week

10,080 minutes per week — of which the average person sleeps about 56.

1 year31,557,600 s

Over 31.5 million seconds per average year — a billion seconds is 31.7 years.

Visual guide: the time ladder

One clock face, every rung of the ladder — see how seconds stack into minutes, hours, days and weeks:

One hour, every unit 12 6 9 3 a clock face = 12 hours 1 minute = 60 seconds = 60,000 ms 1 hour = 60 minutes = 3,600 seconds 1 day = 24 hours = 86,400 seconds 1 week = 7 days = 168 hours = 604,800 seconds

Figure: a clock face with the time-unit ladder — seconds, minutes, hours, days and weeks all derive from the same 60-based chain.

Common mistakes to avoid

Time math trips up even careful people. Watch for these four:

  • Reading 1.5 hours as 1 hour 50 minutes. Decimal hours are base-10, not base-60: 1.5 hr = 1 hr 30 min. Multiply the decimal part by 60 (0.5 × 60 = 30) to get minutes.
  • Treating every month as 30 days. Real months run 28–31 days. The 30.436875-day average is fine for estimates, but never use it for billing, contracts or deadlines — count actual calendar days.
  • Forgetting leap years in long spans. "10 years" is not 3,650 days — it usually includes 2 or 3 leap days. Use the 365.25-day average (or exact dates) for multi-year math.
  • Mixing up ms and µs. A millisecond is 1/1,000 s; a microsecond is 1/1,000,000 s. In computing and science the two differ by a factor of 1,000 — check the prefix.

Pro tips & mental math

Fast time conversions without a calculator:

  • Minutes → hours: divide by 60, keep the fraction. 150 min ÷ 60 = 2.5 hr. The .5 is always 30 minutes, .25 is 15, .75 is 45.
  • Days → hours: ×24, then double-and-adjust. 9 days ≈ (9 × 25) − 9 = 216 hours. The ×25 trick (quarter of ×100) is faster than ×24 for most people.
  • Anchor on 86,400. Seconds per day = 86,400. Need seconds per week? 86,400 × 7 = 604,800. One anchor number unlocks the whole ladder.
  • 90 minutes = 1.5 hours, always. Meetings, movies and matches cluster around 90 minutes — knowing it equals exactly 1.5 hours saves a surprising amount of mental math.

Printable cheat sheet

Want the days-to-hours table on paper? Print a clean, ink-friendly cheat sheet with one click — the page header, widgets and navigation are automatically hidden in the printout:

Fun facts

  • A second is defined by atoms, not the sky. Since 1967, one second = 9,192,631,770 oscillations of a cesium-133 atom — a definition so stable it would drift less than a second in 100 million years.
  • A "day" isn't exactly 24 hours of star-time. Earth spins once relative to the stars in 23 hours 56 minutes 4 seconds (a sidereal day); the extra 4 minutes come from Earth's motion around the Sun.
  • Time zones are younger than the telephone. Before 1883, every US town kept its own local solar time — there were over 300 local times. Railroads forced standard time zones into existence.
  • February 30 has existed. Sweden tried to phase into the Gregorian calendar gradually and ended up with a February 30 in 1712 — a date that will almost certainly never occur again.

The complete guide

The guide covers the 60-60-24-7 chain, why Babylon gave us 60, average months and years, and billing-hours math.

Read: Time Converter — the Complete Guide →

Frequently asked questions

Why are there 60 seconds in a minute?

We inherited base-60 counting from the Babylonians around 2000 BCE. Sixty divides neatly by 2, 3, 4, 5, 6, 10, 12, 15, 20 and 30, which made fractions easy centuries before decimal notation existed.

How many seconds are in a day?

86,400 seconds: 24 hours × 60 minutes × 60 seconds. A week has 604,800 seconds, and an average year has 31,557,600 seconds.

What is a leap year?

A year with 366 days, adding February 29. It happens in years divisible by 4, except century years not divisible by 400 — so 2000 was a leap year but 1900 was not. This converter uses the average year of 365.25 days.

Why is a month 30.436875 days here?

Real months vary from 28 to 31 days, so converters use the average: 365.25 ÷ 12 = 30.436875 days. Fine for estimates — but use exact calendar dates for contracts or deadlines.

How many minutes are in a week?

10,080 minutes: 7 days × 24 hours × 60 minutes. There are 168 hours in a week.

How do I convert 90 minutes to hours?

Divide by 60: 90 ÷ 60 = 1.5 hours, which is 1 hour 30 minutes. A football match is the classic 90-minute example.