1What are metres and feet?
A metre is the metric unit of length — the standard almost everywhere, and the base unit of the metric system. A foot is the imperial unit still used in the United States and, for heights and room sizes, in the UK. Both measure the same thing, but the numbers differ: a 3-metre room is about 9.8 feet, and a 1.8-metre person is about 5 ft 11 in.
The link is fixed: 1 metre = 3.28084 feet. A foot is defined as exactly 0.3048 metres, so the conversion is exact. Multiply metres by 3.28084 to get feet; divide feet by the same number — or multiply by 0.3048 — to get metres back.
You meet this pair constantly. A flat listed in square metres with rooms in feet, a person's height in a US form, a ceiling height, a garden fence, a swimming pool. One multiplication translates all of it.
2How to use the converter
- Type the metres. Decimals work — 1.75 m is fine.
- Read the feet and inches. The converter shows the decimal feet and the everyday form — 5 ft 9 in — which is how heights are actually said.
- Flip it to go back — feet to metres is one tap away.
For heights, the feet-and-inches form is the useful one. For room sizes, decimal feet is often handier — 3.5 m is 11.48 ft, which is easier to mark on a floor than 11 ft 5.8 in.
3The formula — and mental maths
Metres = Feet × 0.3048
1 metre = 3 ft 3.37 in
Two metres is 2 × 3.28084 = 6.56 ft, or 6 ft 6.7 in. Ten feet is 10 × 0.3048 = 3.048 m.
For a quick guess, multiply metres by 3.3 — or triple them and add a little. Three metres is roughly 9.9 ft by the shortcut, against the exact 9.84 ft. Close enough for a room; use the exact 3.28084 when you are cutting, ordering or filling in a form.
For heights, remember that 1.8 m is about 5 ft 11 in, 1.75 m is about 5 ft 9 in, and 1.7 m is about 5 ft 7 in. Those three anchors cover most adults, and they are handy when a form asks for feet and you only know metres.
4Worked example: a room and a person
You are renting a flat advertised as 4.2 m by 3.6 m, and you want to know whether your 6 ft bed fits along the long wall.
Bed: 6 ft is 6 × 0.3048 = 1.83 m.
The bed fits along the 4.2 m wall with room to spare. And a person who is 1.83 m tall is 6 ft — the same number from the other side, which is a nice check that the conversion works both ways.
A ceiling example: a 2.4 m ceiling is 2.4 × 3.28084 = 7.87 ft — about 7 ft 10 in. If a tall shelf is 8 ft, it will not fit, even though 2.4 m and 8 ft sound close. The conversion catches what the ear misses.
5Common mistakes
- Using 3.3 for exact work. Fine for guessing, but over 10 metres it is off by nearly 20 cm. Use 3.28084 when it counts.
- Reading 5.9 ft as 5 ft 9 in. Decimal feet and feet-and-inches are different things. 5.9 ft is 5 ft 10.8 in, because 0.9 × 12 is 10.8 inches.
- Mixing metres and centimetres. 175 cm is 1.75 m. Plugging 175 straight into the metres formula gives a 574 ft person — a clear sign something is off.
- Forgetting the inches. Rounding 6.56 ft to 6 ft loses over half a foot. Keep the inches, or keep a decimal.
One more: converting area by converting length. A room 4 m by 3 m is 12 square metres, which is about 129 square feet — not 12 × 3.28. Area converts with the square of the factor, so use an area converter for floors and gardens.
6Tips for converting smoothly
- Learn the anchors. 1 m ≈ 3.28 ft, 2 m ≈ 6.56 ft, 3 m ≈ 9.84 ft, 10 m ≈ 32.8 ft. With those, you can estimate any room.
- Write both units down. "3.6 m (11.8 ft)" on a note saves the next person from doing the maths — and saves you from doing it twice.
- Use the converter for heights on forms. Visa, medical and job forms want exact heights. One tap beats mental maths when the number goes on a record.
- Check the unit on listings. Property listings mix metres and feet freely, sometimes in the same advert. Confirm every measurement is in the same unit before you compare two flats.
Once the 3.28 rule is in your head, the two systems stop fighting each other. It is one multiplication, and it works every single time.
7Putting it all together
Here is the habit to take away: keep the 3.28 rule and the 1.8 m anchor in your head, and keep the converter on your phone for everything else. The rule covers the thinking; the tool covers the exactness. Between the two, no room, height or fence can slow you down.
One last check that catches most errors: decimal feet are not feet and inches. 5.9 ft is 5 ft 10.8 in, not 5 ft 9 in. Multiply the decimal by 12 to get the inches, and the number suddenly matches what you see on the tape measure — and what the form expects.
One more thing worth knowing: room sizes in listings are not always measured the same way. Some count the whole floor, some count only the usable space, and some round generously. Converting the number correctly is only half the job — measuring the room yourself, or asking how it was measured, is the other half.
Try the free Meters to Feet Converter
Type in metres and get feet and inches — the way people actually say heights.
Try the free Meters to Feet Converter100% free · No account · Private by design
8Frequently asked questions
How many feet is 1 metre?
One metre is 3.28084 feet — about 3 ft 3.37 in.
How do I convert metres to feet in my head?
Multiply by 3.3 for a quick guess — 3 metres is about 9.9 ft (exact: 9.84 ft). For exact work, multiply by 3.28084.
What is 1.8 metres in feet and inches?
1.8 × 3.28084 = 5.91 ft, which is 5 ft 11 in (0.91 × 12 = 10.9 inches).
What is 5 ft 9 in in metres?
5 ft 9 in is 69 inches, which is 1.7526 metres — about 1.75 m.
Why is 5.9 feet not 5 ft 9 in?
Because the decimal is a fraction of a foot, not inches. 5.9 ft is 5 ft plus 0.9 × 12 = 10.8 inches, so 5 ft 10.8 in.
Keep exploring
These tools go well with the Meters to Feet Converter:
Related guides
More step-by-step guides on this topic:
