Area is the one measurement where the two systems feel furthest apart. A room of 100 square feet and a room of 100 square metres are wildly different sizes — the second is nearly eleven times the first. Mix them up and a flat looks palatial on paper and cramped in person, or the other way round.

This guide gives you the exact factor, a worked example for a real flat, and the room-size table that settles most arguments. Whether you are reading a property listing, planning a floor, or ordering flooring, the conversion is one multiplication.

1What is a square foot? What is a square metre?

A square foot (sq ft) is the area of a square with sides one foot long. It is the standard unit for property in the United States and still widely used in the UK, India and Pakistan for flats, houses and plots. A square metre (sq m) is the area of a square with sides one metre long — the standard in most of the rest of the world and in all scientific work.

The two are linked by a fixed factor: 1 square foot = 0.092903 square metres, and in reverse, 1 square metre = 10.7639 square feet. Because a metre is about 3.28 feet, a square metre is about 10.76 square feet — the conversion squares the length factor, which is why the numbers diverge so fast.

You will meet this conversion in property listings, floor plans, flooring and paint calculations, and land records. In many countries, the same property is described in both units depending on who is selling it, so converting is a basic life skill for anyone house-hunting.

2How to use the converter

Three steps:

  1. Enter the area in square feet. Decimals work — 1,250.5 sq ft is fine.
  2. Read the square metres instantly. No button to press.
  3. Round sensibly. For property, one decimal (92.9 sq m) is plenty; for flooring, round up slightly so you order enough.

The converter also runs in reverse — square metres to square feet — for listings that come the other way round.

3The formula, with a worked example

One multiplication:

Square metres = square feet × 0.092903
Square feet = square metres × 10.7639

Here is a worked example for a typical flat:

Example: A flat listed at 1,000 sq ft.
1,000 × 0.092903 = 92.9 sq m.
And a room of 120 sq ft: 120 × 0.092903 = 11.1 sq m — a normal-sized bedroom.
Square feetSquare metresWhat it is
100 sq ft9.3 sq mSmall bedroom
150 sq ft13.9 sq mDecent bedroom
500 sq ft46.5 sq mSmall one-bed flat
1,000 sq ft92.9 sq mTwo-bed flat
2,000 sq ft185.8 sq mFamily house

A handy anchor: 100 sq ft is about 9.3 sq m, and 10 sq m is about 108 sq ft. With those two, you can estimate any listing in seconds.

4Common mistakes

5Tips for property and floor plans

When comparing listings, convert everything to the unit you think in before judging — two flats that look similar in sq ft can differ by a room once converted. When reading a floor plan in feet, check whether the dimensions are internal or external; external measurements include the wall thickness and flatter the size by a few percent.

For flooring, measure each room in feet, convert the total, and add 10% for waste — the square footage calculator on this site does the measuring maths for irregular rooms. And for land, remember the local units too: an acre is 43,560 sq ft and a hectare is 10,000 sq m, and the acres-to-hectares converter handles those.

One more situation where this conversion catches people out: buying property abroad. A flat advertised as 1,200 sq ft in one country and 110 sq m in another are nearly the same size (1,200 sq ft is 111.5 sq m), but the listings look nothing alike at first glance. Convert every listing you are comparing into the same unit before you shortlist anything — otherwise you will discard good flats for looking small, or overpay for one that only looks large because of the unit it was measured in.

The same rule applies to rent. A monthly rent quoted per square foot looks tiny next to a rent quoted per square metre, but the per-square-foot figure is always smaller because the unit is smaller. Multiply the per-square-foot rent by 10.76 to compare it with a per-square-metre rent, and compare like with like. And when a listing gives no area at all, ask for it — a flat with no measurements is a flat the seller does not want you to measure.

Try the free Square Feet to Square Meters Converter

Use the square feet to square meters converter right now — free, no signup, and your numbers never leave your browser.

Try the free Square Feet to Square Meters Converter

100% free · No account · Private by design

6Frequently asked questions

How many square metres is 1,000 square feet?

1,000 sq ft × 0.092903 = 92.9 sq m. A 1,000 sq ft flat is a normal two-bedroom flat in metric terms.

What is 1 square foot in square metres?

1 sq ft = 0.092903 sq m. And 1 sq m = 10.7639 sq ft.

Why is the factor 10.76 and not 3.28?

Because area is length squared. One metre is 3.28 feet, so one square metre is 3.28 × 3.28 = 10.76 square feet. Using 3.28 for area is the most common mistake in this conversion.

How many square feet is 100 square metres?

100 × 10.7639 = 1,076.4 sq ft — a good-sized three-bedroom flat.

What is carpet area vs built-up area?

Carpet area is the usable floor inside the walls. Built-up area adds the walls, and super built-up area adds a share of common spaces. The same flat has three different numbers depending on which is quoted.

How much flooring do I need for a 200 sq ft room?

200 sq ft is 18.6 sq m. Order 10% extra for cuts and waste — about 20.4 sq m — and check the packs' coverage before buying.

Keep exploring

These tools go well with the square feet to square meters converter:

Related guides

More step-by-step guides on this topic: