1What is an acre — and what is a hectare?
An acre is a unit of land area from the old imperial system, still used in the United States, the United Kingdom, and parts of South Asia. By definition it is 43,560 square feet, or 4,840 square yards. The word comes from the Old English word for a field — originally, the amount of land a pair of oxen could plough in a day.
A hectare is the metric unit for land. One hectare is exactly 10,000 square metres — a square 100 metres on each side, about the size of a rugby field. It is the standard land unit across Europe, Australia, Canada, and most of the world, and it shows up in farming, forestry, and real-estate listings everywhere outside the US.
The two units describe the same thing — area — but they were built on different rulers. That is why converting between them needs a fixed factor rather than a round number, and why a rough guess can quietly cost you land or money.
2How to use the acres to hectares converter
Converting is one step, and the tool does it instantly:
- Type the number of acres into the acres box — whole numbers or decimals both work.
- Read the hectares result right away. The converter updates as you type, so you can test a few values in seconds.
- Switch direction if you need hectares to acres instead — the same page converts both ways.
Use it when a listing says "12 acres" and you think in hectares, or when a government form asks for hectares and your deed says acres. It is also handy for comparing two plots listed in different units — convert both to the same unit first, then compare.
3The formula — with a worked example
One acre equals 0.404686 hectares. So the conversion is a single multiplication:
Going the other way, one hectare equals 2.47105 acres:
25 × 0.404686 = 10.117 hectares.
And a 6-hectare plot in acres: 6 × 2.47105 = 14.83 acres.
A quick mental shortcut: an acre is about 0.4 hectares, so halve the acres and take off a little. For 25 acres, half is 12.5, minus a bit gives roughly 10 — close enough for a rough sense, but use the exact factor for anything involving money.
4How big is an acre, really?
Numbers on a page are hard to picture, so here are some anchors:
| Land | Acres | Hectares |
|---|---|---|
| An American football field (with end zones) | 1.32 | 0.53 |
| A typical suburban house plot (US) | 0.2 | 0.08 |
| A small hobby farm | 10 | 4.05 |
| A mid-size family farm | 100 | 40.47 |
| A large commercial farm | 1,000 | 404.69 |
| Central Park, New York | 843 | 341.15 |
That football-field comparison is the one people remember: one acre is about three-quarters of a football field. If someone says "five acres," picture about four football fields side by side.
5Mistakes people make with acres and hectares
- Treating an acre as half a hectare. It is 0.4047, not 0.5. Rounding up to a half overstates the land by nearly a quarter — on a 100-acre deal, that is a 24-hectare error.
- Mixing up acres and square feet. An acre is an area (43,560 sq ft). A plot that is "100 ft by 100 ft" is 10,000 sq ft — only about 0.23 acres.
- Assuming every country uses the same unit. A listing in France, Spain or Australia will be in hectares; one in Texas will be in acres. Always check the unit before comparing prices.
- Forgetting the unit in older deeds. Some old documents in South Asia and the UK use local units (kanal, marla, bigha) alongside acres. Convert each one separately and confirm which unit the deed actually states.
6Buying land: acres in the real world
Converting the number is the easy part. Buying the land is where acres get serious, and the first question is always price per acre — or per hectare, depending on the listing. Never compare two plots by their total price. A 50-acre plot at $500,000 sounds cheaper than a 30-acre plot at $400,000, until you work out the per-acre price: $10,000 against $13,333. The bigger plot is cheaper per acre, but it is still $100,000 more out of your pocket. Per-unit price tells you value; total price tells you affordability. You need both numbers.
Then there is the question of what the acres actually include. Woodland, wetland, slopes and road frontage all change what land is worth, even at the same acreage. Ten acres of flat, fertile farmland and ten acres of steep, rocky hillside are not the same purchase, and a listing that only gives the acreage is hiding the most important facts. Always walk the land, or get a surveyor to do it, before you agree a price.
Zoning and planning rules matter too. Land zoned for farming cannot automatically be built on, and land with a planning permission is worth far more than the same acres without one. In the UK, agricultural land and residential building land can differ in price by a factor of ten or more for the same area. The acreage tells you the size; the planning status tells you what you can do with it.
Finally, check the boundaries. Old deeds and fences do not always agree, and a neighbour's fence can sit several metres inside your land — or yours inside theirs. A proper survey, with the boundaries marked, is a small cost against the price of the land, and it settles arguments before they start. Convert the acres, compare the per-unit price, then verify everything else on the ground.
7Tips for buying and comparing land
Convert first, compare second. When two plots are listed in different units, convert both to hectares (or both to acres) before you compare price per unit. A "cheaper" plot often turns out to be smaller once the units match.
Ask for the survey, not just the listing. Advertised acreage can be rounded or approximate. A proper land survey gives the exact area, and the price should follow the surveyed number, not the brochure one.
Remember that shape matters too. Ten acres in a neat square is more usable than ten acres in a long thin strip along a road. Area tells you the size; the shape tells you what you can do with it.
Convert acres to hectares — try the free converter
Type any number of acres and get the exact hectares instantly — or flip it around and convert hectares back to acres.
🌾 Open the Acres to Hectares Converter100% free · No account · Private by design
8Frequently asked questions
How many hectares is 1 acre?
One acre is 0.404686 hectares. Multiply acres by 0.404686 to get hectares, or divide hectares by 0.404686 (multiply by 2.47105) to get acres.
How many acres is 1 hectare?
One hectare is 2.47105 acres — a square 100 metres by 100 metres, or 10,000 square metres.
Why do some countries use acres and others hectares?
Acres come from the old English imperial system and stuck in the US and UK. Hectares are metric and are the standard almost everywhere else. Both measure the same thing, so listings just follow local tradition.
Is an acre bigger than a hectare?
No — a hectare is bigger. One hectare equals about 2.47 acres, so an acre is roughly 40% of a hectare.
How big is an acre in square feet?
One acre is 43,560 square feet, or 4,840 square yards. A square plot of one acre would be about 208.7 feet on each side.
What is an acre used for today?
Mainly land, farms and property: farm sizes, real-estate plots, parks and forests in the US, UK and parts of South Asia. Most of the rest of the world lists the same land in hectares.
Keep exploring
Land math does not stop at acres. These tools handle the rest:
